Standard Block Sink |
 Straight front, the front is on a 90 degree angle to the bottom of the sink. |
|
Slant front block sink with scoop |
 Slant front, this sink has a 2” slant from top to bottom |
|
Slant front sink with bow |
 Slant front, this sink has a 2” slant from top to bottom |
|
|
- Bow / Slant front, this is just as it’s name implies
- Slant front, this sink has a 2” slant from top to bottom
- Straight front, the front is on a 90 degree angle to the bottom of the sink.
- The drains can be off center (upcharge).
- Single bowl, Double bowl, 1 & ½ bowls.
Hand Built Sinks by Bucks County Soapstone feature tongue and groove joints as our construction method. The bottom of the sink will be tapered toward the drain and the drain hole will fit any manufacturers strainer. We do recommend the Kohler 8801. We offer these sinks in custom sizes or standard sizes. These sinks are also available with the following options.
Standard Straight Front |
|
|
Slant Front Sink |
 |
|
Scooped Front |
|
|
Slant and Scooped |
|
|
Offset drain and high backsplash |
 |
|
High Backsplash |
|
|
Vessel sinks |
More vessel bowl sinks can be found here.
|
|
Laundry Sinks |
 |
• Slant front, this sink has a 2” slant from top to bottom
• Straight front, the front is on a 90 degree angle to the bottom of the sink.
• The drains can be off center (upcharge).
• Single bowl, Double bowl, 1 & ½ bowls.
First of all let us assure you that we make every kitchen sink right here in Perkasie, Pennsylvania. Let’s try to make this easy to understand. If you are only looking to purchase a sink what we need to know from you is what width do you need and what height will work best for you and your cabinetry.
The width of your sink is determined by opening the doors to your sink cabinet and measuring from the inside of the face frame on the left to the inside of the face frame on the right. For example, if your sink base cabinet is 36” wide and the face frame is 1 ½” wide on each side, your sink should be 33” wide.
- To get the height of your sink we want to know the dimension from the top of your cabinet (not countertop) to the top of the cross rail of your sink base cabinet. This is usually 9 or 10 inches high.
Do you want a block sink? A block sink starts out as a monolithic block, we carve the sink to whatever configuration meets your needs. The interior corners of the sink all have a 1.125 radius and the bottom is tapered toward the drain. We have a few options for this type of sink.